The two-stage assembly flowshop scheduling problem with bicriteria of makespan and mean completion time

In this paper, we address the two-stage assembly flowshop scheduling problem with a weighted sum of makespan and mean completion time criteria, known as bicriteria. Since the problem is NP-hard, we propose heuristics to solve the problem. Specifically, we propose three heuristics; simulated annealing (SA), ant colony optimization (ACO), and self-adaptive differential evolution (SDE). We have conducted computational experiments to compare the performance of the proposed heuristics. It is statistically shown that both SA and SDE perform better than ACO. Moreover, the experiments reveal that SA, in general, performs better than SDE, while SA consumes less CPU time than both SDE and ACO. Therefore, SA is shown to be the best heuristic for the problem.     

Sentential Count Rules for Arabic Language

This paper presents two grammars for reading numbers of classical andmodern Arabic language. The grammars make use of the structured Arabiccounting system to present an accurate and compact grammar that can beeasily implemented in different platforms. Automating the process ofreading numbers from its numerical representation to its sentential formhas many applications. Inquiring about your bank balance over the phone,automatically writing the amount of checks (from numerical form toletter form), and reading for the blind people are some of the fieldsthat automated reading of numbers can be of service. The parsing problemof sentential representation of numbers in the Arabic language is alsoaddressed. A grammar to convert from sentential representation to thenumerical representation is also presented. Grammars presented can beused to translate from the sentential Arabic numbers to sententialEnglish numbers, and vice versa, by using the common numericalrepresentation as an intermediate code. Such methodology can be used toaid the automatic translation between the two natural languages. Allgrammars described in this paper have been implemented on a UNIX system.Examples of different number representations and the output of theimplementation of the grammars are given as part of the paper.     

Analysis of interfacial fracture in ceramic–metal assemblies under effect of thermal residual stresses

In this study, the finite element method is used to analyze the behavior of interface cracks in ceramic–metal assemblies under the effect of thermal residual stresses. These stresses are due to the elaboration process of the bimaterial junctions. The stress intensity factor is used as fracture criterion. The effects of the temperature of elaboration and the metal thickness on the variations of the thermal SIF are highlighted. The obtained results show that the mode of fracture under thermal residual stresses for all ceramic–metal couples is the mixed mode (opening + sliding). The mode II (the sliding mode) is the dominant mode.     

Numerical simulation of the axial collapse of thin-walled polygonal section tubes

This paper deals with the post-buckling deformation characteristics of aluminum alloy extruded polygonal section tubes subjected to dynamic axial impacts. The explicit finite element code LS-DYNA is the primary analytical tool used in this investigation. The study focuses on investigating a post-buckling deformation phenomenon that is primarily manifested by an axial crumpling action that generates material folds as the impact energy is dissipated. The research is conducted in two phases. The first phase consists of validating the LS-DYNA model parameters and numerical results pertaining to thin-walled aluminum extruded square tubes with actual published experimental data. The post-buckling deformation characteristics of the specimens such as the overall final configuration and the various folding deformation modes (extensional, symmetric and asymmetric) resulting from the axial collapse of the member is also investigated in a subsequent phase. Based on the numerical simulation results, it is apparent that the increase in the number of walls (flanges) has a direct impact on the mean axial crushing force and permanent displacement parameters. In particular, the adoption of a hexagonal tube section as an axially loaded energy absorbing column yields an average increase of 11% in the mean axial crushing force and an average decrease of 10% in the permanent displacement. The greatest benefits are obtained in the specimens with the thinnest nominal wall thickness, where the upper bound results show an average increase of 27% in the mean axial crushing force and average decrease of 20% in the permanent displacement.     

Model based real time monitoring for collision detection of an industrial robot

This paper deals with a model based real-time virtual simulator of industrial robot in order to detect eventual external collision. The implemented method concerns a model based Fault Detection and Isolation used to determine any lock of motion from an actuated robot joint after contact with static obstacles. Online implementation has been done in order to validate the proposed approach.     

Numerical analysis of the stress intensity factors for repaired cracks from a notch with bonded composite semicircular patch

In this paper, we investigated the crack growth behaviour of cracked thin aluminium plate repaired with bonded composite patch. The finite element method is used to study the performance of the bonded composite reinforcement or repair for reducing the stress concentration at a semicircular lateral notch and repairing cracks emanating from this kind of notch. The effects of the adhesive properties and the patch size on the stress intensity factor variation at the crack tip in mode I were highlighted. The obtained results show that the stress concentration factor at the semicircular notch root and the stress intensity factor of a crack emanating from notch are reduced with the increase of the diameter and the number of the semicircular patch. The maximal reduction of stress intensity factor is about 42% and 54%, respectively, for single and double patch. However, the gain in the patch thickness increases with the increase of the crack length and it decreases when the patch thickness increases. The adhesive properties must be optimised in order to increase the performance of the patch repair or reinforcement.     

Analysis of the plastic zone size ahead of repaired cracks with bonded composite patch of metallic aircraft structures

In this study, the three-dimensional and non-linear finite element method is used to estimate the performance of the bonded composite repair of metallic aircraft structures by analyzing the plastic zone size ahead of repaired cracks. Several calculations have been realized to extract the plasticized elements around the crack tip of repaired crack. The obtained results show that the presence of the composite patch reduces considerably the size of the plastic zone ahead of the crack. The effects of the adhesive properties and the patch thickness on the plastic zone size ahead of repaired cracks were analyzed.     

Finite element analysis of the behaviour of microvoids in the cement mantle of cemented hip stem: Static and dynamic analysis

In this study, the three-dimensional finite element (FE) method is used to analyse the stress distribution around microcavities in the cement mantle of total hip arthoplasty (THA). Static and dynamic loading were analysed. The effect of the position of the microdefect on the stress distribution is also highlighted. The obtained results show that microcavity located in the proximal zone of the prosthesis is subject to higher stress field. The static loading generates higher stresses than dynamic one if the microcavity is located in the proximal and distal zones of the prosthesis. The inverse case is observed when the microcavity is located in the medial zone.     

Analysis of the effect of load direction on the stress distribution in dental implant

In this work, the finite element method is used to compute the distribution of stresses in dental prosthesis. The stress analysis is particularly focused at the interface bone–implant in different positions: distal zone, medial zone and proximal zone of these components. The effects of the intensity and the direction of loading on the stress variation were highlighted.     

Service level agreement in optical networks

This article proposes a Service Level Agreement applied to the optical domain (O-sla), which is expected to be the near and long term network technology thanks, among other things, to the great bandwidth capacity offered by optical devices. After an exposition of the rationale behind an optical sla, parameters which could enter in thisO-sla, as well as their values for four classes of services, are proposed. Different client (wavelength or sub-wavelength) and services types (from leased wavelength to bandwidth on demand) are distinguished when necessary.